Drag Boat City .com - Parts for Sale

-New Parts for Sale -

		E-mail: heavyd@dragboatcity.com Phone/Fax: (239) 277-9114
If you would like to order parts just email me your order and your full address, Name and phone no# and I will call you back with a total for your parts and shipping !!!

BRAND NEW PROPS! Facts About Props
Rake	Pitch	Diameter
Higher Lift More Rake, More Bow Lift More Bottom End	Higher the Pitch, More Slip at Bottom End Hook at Top End Lower Pitch, More RPM	Bigger Diameter, More Lift More Torque, Less RPM

New Flat Bottom Props - 1" Shaft

10 3/4 x 15                                                   They Cost New $750.00
11 1/4 x 15
11 3/8 x 15                                                   Dragboatcity Price $ 575.00
11 1/4 x 16                                                   Plus Shipping
11 3/8 x 16
11 1/2 x 16                                                   LH- Rotation

New Flat Bottom Props - 1 1/8" Shaft

11 x 15              Out of stock                          They Cost New $750.00
11 1/8 x 15       Out of stock
11 1/2 x 15        Out of stock                          Dragboatcity Price $ 575.00
11 1/8 x 16        Out of stock                          Plus Shipping
11 1/4 x 16        Out of stock
11 1/2 x 16        Out of stock                          LH- Rotation

New Cleaver Props - 1" Shaft

11 1/4 x 16      Out of stock                           They Cost New $760.00
11 1/2 x 17      Out of stock
11 3/4 x 17      Out of stock                        Dragboatcity Price $ 575.00
                                                                   Plus Shipping

                                                                  LH- Rotation

New Cleaver Props - 1 1/8" Shaft

11 1/4 x 17                                                  They Cost New $760.00
11 1/2 x 17    Out of Stock
11 3/4 x 17    Out of Stock                            Dragboatcity Price $ 575.00
                                                                  Plus Shipping

                                                                  LH- Rotation

Used props for sale        Prices         Quality of the props sold as is
                                                                                             1 thru 10

11 1/4 x 15                               $ 400.00                                  9      Sold
11 1/2 x 18                               $ 400.00                                  9      Sold
11 x 16                                    $ 400.00                                  9       Sold
11 3/8 x 15                               $ 400.00                                  9      Sold

                                             Plus Shipping            Flats 1 In Shafts
                                                                               2 Blades LH- Rotation

Neovane WaterPump Rebuild Kits
Only- $ 159. 99
Plus Shipping

Kit Includes:

3 SS C-clips
1 Pump Seal Kit
2 Bearings
1 Steel Shaft
( 4 1/2 x 1/2 )
1 Rubber Impeller
1 Gasket
8 SS Screws
1 Diagram Sheet
Fits Models:
V-755
H-500
V-750

Click on photo for shaft diagram

Magnaflow Cam- Driven Water Pump in Stock

The Magnaflow pump is a high capacity pump
Capable of supplying your cooling needs
In high performance applications
Pump accepts standard 4 bolts cover

Prices $375.00
Plus Shipping

Replacement Impeller for Neovane Water Pump ( A )

1" Pump includes 0- ring seal these pump can easily be identified by
the 2 retaining pins that retain the cover, one on each side.

Kits Includes
New impeller
Shear pin & O -ring,
Fits pump V-105

Prices $ 34.99
Plus Shipping

Replacement Impeller for Neovane Water Pump ( B )

Kits Includes
New impeller,
Shear pin,
And gasket
Fits Pump numbers V-505, V-755, V-750

Prices $ 34.99
Plus Shipping

Replacement Impeller for Nicson Water Pump ( C )

Kit Includes
Nicson style pumps
with spline drive impeller.
& a rubber o- ring

Prices $ 49.99
Plus Shipping

Replacement Impeller for Magnaflow Water Pump ( D )

Kit Includes
New Rubber Impeller
and O-Rings

Prices $ 49.99
Plus Shipping

Timing Covers in Stock

Cast Aluminum timing covers,
Covers include cam drive and bolts,
And a new crank seal.
Cover accepts standard 4 bolts pumps
Accepts BBC mark 4

Prices $129.99
Plus Shipping

Seat Shell A

In - Stock - Unpainted
Width 20", Depth 18", Height 16 1/2"
Gelcoat colors black or white

$115.00 per seat shell
Plus shipping

Click on Photos to Enlarge

Seat Shell B

In - Stock - Unpainted
Width 18", Depth 18", Height 18 1/2"
Gelcoat colors black or white

$115.00 per seat shell
Plus shipping

Click on Photos to Enlarge

Seat Shell C For BIG Boys

In - Stock - Unpainted
Width 22" Depth 18"Height 16 1/2"
Gelcoat colors black or white

$125.00 per seat shell
Plus shipping

Click on Photos to Enlarge

Brand New Steel Wedge Rudders

Commonly used on both Flat Bottom
& V- Bottom boats
12 x 5 Blade and a 13 inch Shaft
They have to be order

Prices $ 625.00 + shipping

Polished Cast Aluminum Water Divider Outlet

Chevy V8 With 2 1/2 Pipe Thread

Prices $29.99
Plus Shipping

Heavy Duty Prop Puller

Made from 4140 Steel and will work on 3 blades to.

Prices $ 99.99
Plus Shipping

Brand New Casale V - drives

10 degree or 12 degree
With or without a whirlaway
3 dog in and out

Prices $ 3295.00
Plus Shipping

Used Casale 10 Degree V-drive

New 1 3/8 Input Shaft 1" Output Shaft
18 Gears, In and out,
Polished Mid plates 24 inch Wide
Has all stainless steel hardware
Smooth and quiet

Prices $ 1500.00 They cost $3295.00 New
Plus Free Shipping in USA only

Used Casale 12 Degree V-drive

1 1/4 " Input Shaft 1" Output Shaft
25 Gears, in and out, with a whirlaway
Polished Locking Shift handle
Completely Polished 25 inch mid plate to.
Smooth and quiet !!!!!
Has all stainless steel hardware

Sold !!!

Prices $ 1900.00                                    They cost $3295.00 New
Plus FREE Shipping in USA only

Used Casale 12 Degree V-drive

12 degree Casale with new gaskets
Brand new 3/8 Mid plate, 24 inch wide
1 1/4 input shaft. 1 # inch output shaft.
has 15 % gears with a in & out box
Has all stainless steel hardware
Smooth and Quiet

$1.350.00                                                             They Cost $ 3.295.00 New
Plus Free Shipping in USA only

Brand New Mid Plates For Casale

Mid plates are 3/8 thick and 24 inch wide
they are Totally polished
they are NOT cut out for large gears

Prices $ 165.00
Plus Shipping

V- Drive Bearing Puller

$69.99 plus shipping

Whirlaway Kits

Whirlaway kits for 5 or 6 bolts lower housing
Please specify left or right hand rotation
Please specify 1 inch or 1/14 prop shaft

Prices $ 800.00 Normally $ 950.00
Plus Shipping Plus Shipping

Locking V- Drive Billet Shift Handles

Locking handle- Aluminum
Includes locking- quadrant which bolts to v- drive

Please specify 5 or 6 bolt when ordering
check the bolts on the shifter cover if it is a
5 /16 its a 5 bolt & if it a 1/4 20 bolt it a 6 bolt
5 bolt - A
6 bolt - B

$ 150. 00
Plus Shipping

V- Drive Split Case Gasket Set

Includes gasket for cases, caps, lower housing,
side cover and o- rings

$ 35.00 + Shipping

BRAND NEW In Stock

V-Drive 9 Quarts oil pan for BBC These are GREAT oil pan
Pan is double baffled with a full length windage tray
Also features a water tight dipstick and large 12AN oil drain suitable for installing
an external oil drain line. Built from extra heavy 16 gauge materia
Fits most aluminum rods, pan will fit up to a 4 1/2 stroke without modification.
Pick-upTube included.

$525.00 plus shipping

Polished Aluminum Flip-Top Fuel Fill

This polished Aluminum fuel fill has been America's No. 1 choice for decades.
It's spring loaded flip top provides quick easy access.
The base of this cap measures 2.5 x 3.5 and accepts a 2" fuel fill hose

$ 39.99 Plus Shipping

New Floor or Stringer Mount Foot Throttle

These throttles are cast from 356 aluminum and hand polished.
Available for floor or stringer mount applications. These are great pedals.
Does not come with cable.

$149.99 plus shipping

Stringer Mount Peg Foot Throttle

Peg billet foot throttle machined
from 6061 aluminum
Comes unpolished

$ 149.99 Plus Shipping

Double Seal Prop Shaft Stuffing Box

Double seal assembly - 1 " Shaft $ 99.99 + Shipping
Heavy Duty Double Seal - 1 1/8" Shaft $ 99.99 + Shipping

Overall length is 3 1/2 In.

Chrome Double Seal Rudder Stuffing Box

Chrome Bronze Double seal Models
The inside height of a double seal box is 3 inch

Doubles Seal for 1 in Rudder $ 99.99 + Shipping
Double Seal for 1 1/8 Rudder $ 99.99 + Shipping

2 3/8 from center to center Hole
Base size is 3 1/4 inch square

Chrome Single Seal Rudder Stuffing Box

Chrome Bronze Single seal Models
The inside height of a Single seal box is 2 inch

Single Seal for 1 in Rudder $ 99.99 + Shipping
Single Seal for 1 1/8 Rudder $ 99.99 + Shipping

2 3/8 from center to center Hole
Base size is 3 1/4 inch square

Chrome Prop Shaft Coupler

Steel Chrome split Coupler
for a 1 inch Shaft

4 Bolt Tightening and 2 Set Screws $ 80.00 + Shipping
Coupler is 3 1/2 inch long & 2 around

Prop Shaft Coupler

Heavy Duty Steel split Coupler for a
1 1/8 Inch Shaft

Heavy Duty Steel split Coupler for a
1 Inch Shaft

6 Bolt Tightening and 4 Set Screws $ 189.99 + Shipping
Coupler is 5 1/4 inch long & 2 1/4 around

Strut Bushing

Comes in 4 1/2 In Lengths only, cut and use haft
in each end of the Strut Barrel.

Fiber 1- ID x 1 1/4 Barrel OD
Fiber 1- ID x 1 3/8 Barrel OD
Fiber 1 1/8 - ID x 1 3/8 Barrel OD

$ 25.00 + Shipping

Dragboat Covers

These are great Covers, they are water resistant
Silver material reflects heat away from the boat.
They will cover a Hydro or a Flat Bottom
They are lite Weight and will cover the whole boat.

Will NOT COVER A BOAT WITH A WING !!!!!

155.00 + Shipping

Motor Rails

1/4 thick 2 x 2 inch Wide
5 Ft. Long
Totally Polished

$100.00 + Shipping

New Aluminum Motor Plates A

These Aluminum plates are 3/8 thick
25 1/2 inch wide. With the boat level and the rails level
in the boat, these plate have a 1 degree angel
on them, as you can see in the pic.
they are unpolished

A - Front Plate $200.00 + Shipping
A - Rear Plate $175.00 + Shipping

New Aluminum Motor Plates B

These Aluminum plates are 3/8 thick
25 1/2 inch wide. With the boat level and the rails level
in the boat, these plate have a 6 degree angel
on them, as you can see in the pic.
they are unpolished

B - Front Plate $200.00 + Shipping
B - Rear Plate $175.00 + Shipping

BBC Flywheel Cover

This is a Light Weight Polished Aluminum Flywheel Cover

$ 189.99 + Shipping

Motor Mount Blocks

Precision Machined from billet 6061 T Aluminum
2' wide 2 1/2 Tall 2 1/2 Long
Drill for 3/8 Bolts

$ 29.99 Each + Shipping

Stringer Mount Battery Boxs in Stock

26 inch Wide all
Stainless Hardware included
will fit from a 24 to 30 Series Group Battery
Top Black & Bottom Totally Polished

$110. 00 + Shipping

New Jones Tach Dash Mount in Stock

They Are BRAND NEW never used
Comes with mounting hardware

$ 89.99 + Shipping

Jones 9 RPM Tach Dash Mount

This is a used Jones 9 RPM tach in great shape                New Would cost
The Housing is BRAND NEW                                           $ 89.99
The Cable is 6 Ft. long and BRAND NEW                          $ 145.00
The tach is used but in great shape                                   $ 590.00
The tach drive is used but in great shape to.                       $ 485.00

$ 499.99 + Free shipping any where in the USA

Email - Heavyd@dragboatcity.com